How to Fix Blue Screen BSOD error in Windows 10

How to Fix Blue Screen BSOD error in Windows 10 Windows frequently reboots with a blue-screen error page error within the blank area during start-up. Or sometimes after a recent hardware device installation, software update, or especially after a recent Windows 10 Fall Creators Update, page_fault_in_nonpaged_area Blue Screen error with stop code 0x00000050 is often displayed. If you will like to know How to Fix Plugged in and not Charging in Windows 7.

The blue screen error happens when your computer detects something it isn’t able to handle. Therefore, it shuts down to protect itself from harm. A message indicating an error like page error in blank area or. is displayed. If you’re also suffering from the blue screen error then you need to restart Windows often to see this BSOD error at startup. Here, apply the following solutions to get rid of BSOD Error.

Fix Blue Screen BSOD Error in Windows 10

The root cause of this BSOD error can be paging file size (wrong paging file configuration), power failure, faulty hardware device (like RAM or hard drive), antivirus software, corrupted system files or bad drivers, etc. As this blue screen issue is caused by many reasons; We have compiled many solutions to correct the Page error within blank space the BSOD issue.

After a restart, Windows will begin normal, however for certain people, Windows starts up frequently and doesn’t permit any troubleshooting measures to be implemented to fix the problem. For users who experience windows that begin to appear after restarting they typically use Bellow solutions to fix the blue screen. Users whose windows restart often require an initial repair or enter safe mode to follow Bellow’s troubleshooting instructions.

Perform a start-up repair

Unplug all the peripherals first, then launch Windows Checker. After that, you can move to the next option. Perform a startup repair that fixes missing/corrupt/incompatible drivers and system files, corrupted disk metadata (master boot record, partition table, or boot sector), problematic update installation, etc.

For a startup repair it is necessary to open Advanced Options. Windows can run it using Windows installation media. If you don’t have one create an online link to the installation media by following this. The first screen is skipped Click Repair PC> Troubleshoot > Advanced options at the bottom of the screen. Then select Startup Repair.

Boot into safe mode

If the startup repair did not fix the issue, start the computer in Safe Mode which allows windows to start with the minimum requirements for your system and permits you to carry out troubleshooting to correct issues. To open Safe Mode, click Advanced > Startup Settings Next, click Restart then hit F4 to open Safe Mode and F5 to open Safe Mode with Networking.

Now, when you enter safe mode and log into your Windows PC, follow the steps below to fix PAGE_FAULT_IN_NONPAGED_AREA and boot your PC normally.

Enable the automatic size of file management

Press Win + R, type SystemPropertiesAdvanced.exe, and press Enter to open System Properties. After that, go into the Advanced tab, then click Settings > performance > Setting click Change and remove all check marks that indicates that you can automate managing the hall file size on all drives. Select the no Paging radio button for your file and then click to set it.

Change the setting for memory dumps.

Sometimes, memory issues can trigger the error to show up. Your computer is experiencing an issue and requires restart Page fault with no windows in the page’s area 10. BSOD error . To resolve this issue we need to change your memory devices.

To alter the setting of the memory dump in the System Properties to change the setting for memory dumps in System Properties: press Windows key and input sysdm.cpl and press Enter. After that, open the Advanced tab and select Startup and Recovery settings. In this section, uncheck the box Automatically Restart whenever you write debug data. Select Complete memory dump in the dropdown menu. Click Apply and OK.

Uninstall all recently installed applications

If you observe that the error began to show up immediately when you installed an application, or an entirely new driver. It is possible that this program might cause the error. The program will be forced to be removed, which can aid in fixing the blue-screen error.

To remove a recently installed application, press Win key and type appwiz.cpl, and enter. Then right-click on the recently installed application and choose uninstall. If you find that the issue occurred following the installation of a new driver or update, proceed to your next steps.

Disable/uninstall or install an update

Sometimes, this blank space can be caused by damaged drivers. In this instance it is necessary to remove, update or disable and reinstall the drivers.

To open this menu you need to Press Win Key then search for devmgmt.msc, and hit Enter in order to start Device Manager. It will show all the installed drivers. If you have any drivers that are marked that have yellow exclamation marks, you can right click on them and select update. Follow the instructions displayed on screen.

Additionally, make sure to update the graphics/display driver along with the network adapter, display driver, and the sound driver. Visit the website of the manufacturer and download the most current driver, and install it.

If you observe that the issue began after the latest driver update You can use using the roll back Driver option to restore the current driver back to the older version. This will fix the issue with the page that appears within the Blue Screen Error. You can check this driver rollback update, uninstall and install driver for the device on Windows 10.

Disable fastboot

When it came to Windows 10, Microsoft added the feature of fast start (disabling this hybrid gadget) to reduce startup time and let Windows 10 boot up very quick. However, many users discovered some benefits of the quick start feature.  Also, disabling the feature known as fastboot, which helps with various startup issues as well as the majority of BSOD error messages.

To disable the fast-start feature, visit Control Panel and then Control Panel -> Power Options (small icons view) Select the Power button’s behavior and select Modify settings. Currently inaccessible. Next, in the Shutdown Settings (Shutdown Settings) remove the checkmark Turn off fast start (recommended) Save Changes.

Check and fix disk drive errors

Disk drive problems such as bed sectors, defective HDD can also trigger various Blue screen issues. To ensure that errors in the disk drive aren’t causing an error on the page in a blank region the blue error on your screen. Try this CHKDSK option .

Start a command prompt as administrator enter the command chkdsk c. /f. and then /r and hit Enter. Tips: CHKDSK is short for Check Disk C: is the letter of your drive you need to examine, /F is a way to repairs to disks and /R refers to the recovery process of bad sectors.

If it asks if you wish to program this volume to be checked when the system is scheduled to reboot? Click Y, then restart your system. It will repair and scan your computer. Disk errors on the drive. Expect to be 100% completed following windows’ normal start.

Fix Memory errors

Sometimes, the error could result from a an electrical issue in the RAM. To correct this issue take out the RAM from the computer, service, then insert it back within a couple of minutes. It is essential to ensure that all power cables are unplugged. Prior to taking out the RAM, you should take out the battery. Then, reboot your PC. Make sure that you check your computer correctly. Also, run the Memory Diagnostic Tool to identify and correct problems with memory.

At ITEEGEEk we believe that after applying the above your blue screen BSOD error would be resolved. Please share Article if you find it helpful, thanks.

Advertisement

Posted

in

, ,

by

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *